Enerdrive B-TEC 300Ah Lithium Battery

2 Reviews | Q&A

$3,179

Save $1,042 (25%) off RRP of $4,221

Take an EXTRA $70 OFF! Add to cart to get an instant discount.
Sale Ends in

FREE SHIPPING

Accessories

$533

$412

$62

$109

Click '+' to show more accessories
Learn More»
In stock, dispatch 1 - 2 days Express Shipping Price Match Guarantee Customer Reviews

Product Description

Enerdrive B-TEC 300Ah Lithium Battery, 5 Year Warranty. Available in 12v 300Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Key Features:

  • New design BMS
  • Max discharge current 250A (15mins) - 200A continuous
  • Max charge current 190A (30mins)
  • Can be connected in parallel (up to 4 batteries)
  • Built in flat battery reset button
  • Includes mounting tray and 2 straps
  • Communication ports (RS485) for future integration
  • 5 year warranty & lifetime tech support

Smart Phone Monitoring System

The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

Battery Capacity Battery Voltage Battery Current (Amps)
Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status
Individual Cell Voltage Battery Temperature Battery Cycles
Battery Alarms Battery Event Information  

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings

Lithium v AGM Capacities:

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium G2 = 320Ah AGM
  • 300Ah Lithium G2 = 480Ah AGM 

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

The New Generation 2 B-TEC

So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.

Dimension Original Generation 2

Length 519mm 521mm
Width 273mm 280mm
Height 222mm 238mm

Also included for free is a metal battery tray and hold down strap to complete the installation process.

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.

The New Enerdrive Generation 2 (G2) B-TEC 300Ah Lithium Battery now comes with a 5 year warranty, giving you peace of mind that this product will keep you covered.

With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 4000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note: The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 4 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

The G2 300Ah battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.

If you are requiring a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

Product Manual

Specifications

SKU EPL-300BT-12V-G2

Brand Enerdrive

GTIN 9342616019924

Warranty Period: 5 Years

Product Category Batteries

Battery Voltage 12V

Amp Hours (ah) 300

Battery Length (mm) 521

Battery Width (mm) 280

Battery Height (mm) 238

Battery Weight (kg) 38.2

Model EPL-300BT-12V

Nominal Voltage 12.8V

Nominal Capacity 300Ah

Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles

Battery Charge Temperature 0 ̴ 45°C

Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V

Standby (Float) Voltage 13.50 ̴ 13.80V

Maximum Charge Current 190A @ 25°C for 30mins

Recommended Charge Current for Maximum Life 60~120A

Battery Discharge Temperature -20 ̴ 60°C

Battery Output Voltage Range 11.00 ̴ 14.60V

Maximum Discharge Current 250A @ 25˚C ±5˚C for 15 mins

Pulse Discharge Current 450A for 1.0s

Discharge Cut-off Voltage ≤ 11.20V

Over-Charge Protection Per Cell 3.90V ± 0.03V

Over-Charge Release Per Cell 3.60V ± 0.05V

Over-Charge Release Method Discharge below release voltage

Over-discharge Protection Per Cell 2.80V ± 0.05V

Over-discharge Release Per Cell 3.20V ± 0.05V

Over-discharge Release Method Apply Charge/Voltage ≥12.8V

Discharge Over Current 280A for 25s – 400A for 3.5s

Battery Manual Reset Button Yes

Protection Reset Time Approx 10s Auto Release

Over Current Release Method Disconnect Load

Battery Charge Over Temperature Protection to 55°C ± 5°C, Release at 45°C ± 5°C

Battery Discharge Over Temperature Protection to 65°C ± 5°C, Release at 50°C ± 5°C

Short Circuit Protection Auto release after 5s

Case Construction Hi Impact ABS Plastic

Temperature & Humidity Range ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH, ≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH


Videos

Pro Series to B-TEC - The Next Step for Enerdrive

 

Enerdrive B-TEC Lithium Batteries - Part 1 - Application

 

Enerdrive B-TEC Lithium Batteries - Part 2 - Specifications

 

Enerdrive B-TEC Lithium Batteries - Part 3 - Installation

 

Enerdrive B-TEC Lithium Batteries - Part 4 - Settings

 

Enerdrive B-TEC Lithium Batteries - Part 5 - Operation

 

Enerdrive B-TEC Lithium Batteries - Part 6 - Fault Finding

 

How To: Resetting A Flat Enerdrive BTEC or eLITE Battery

 

Connecting Your Enerdrive Lithium Battery to a Simarine Monitor

 

Exploring The Enerdrive BMS Found Internally In Their Lithium Batteries

 

Customer Reviews

300AH Enerdrive “the beast” Review by
I just love the Enerdrive batteries, the Bluetooth connectivity is amazing and allows. Excellent connectivity and tells you exactly what the battery is up to. This 300Ah Enerdrive is a beast, enough to power the van for a couple of days no charge and you can hook the induction cook top up and bang in combination with the 2000w inverter it just works.
(Posted on 4 August 2023)
Excellent battery, excellent service. Review by
This 300 ah lithium battery is everything I had hoped for. I've now installed it in our off road camper and it's performing perfectly. Instillation was very straight forward. A full night's draw uses only 8%of the capacity.It has bluetooth connectivity that is giving me all the info I need. I've tested the Bluetooth data against my multitesteter and it's very accurate.
(Posted on 26 November 2022)

Write a product review

Product Q&A

Ask Us a Question
  • Can you series link these batteries to create a 300amp 24v system?Also, the 40amp dc2dc charger is that capable of charging 12v input to 24v output?

    Hi There,

    Enerdrive have advised that none of their batteries can be connected in series.

    In regard to the DC DC charger, the 12V model will only output 12V. Enerdrive make a 30A 24V model. You can find it here:

    https://www.mygenerator.com.au/enerdrive-epower-24v-30a-dc-to-dc-battery-charger.html

  • I notice that the specs say the recommended charging current for the 300ah BTEC is 80-120amps. Do you still see many people use the Enerdrive ePOWER 40A AC Battery Charger for the 300ah BTEC?

    The 80 - 120A values are the nominal charge rates, not recommended charge rates. Using the 40A charger is fine as you will not always be recharging the full 300Ah, just the bit you have used, so yes, we do have many people still using it for 300BTec batteries

  • Can I series connect B-TEC batteries to achieve higher voltage?

    No. Enerdrive oers higher voltage Lithium solutions - contact us for details.

  • Can I use an Inverter with my B-TEC battery?

    Yes. Refer to Section 4 of the manual for more detail.

  • Can I install the B-TEC battery in a wet area?

    No. Due to the construction of the B-TEC cases the batteries must be installed in a dry environment to protect against moisture ingress.

  • Can I parallel B-TEC batteries?

    The short answer is yes. The long answer is - make sure the link cables are of the same size or greater than your load/charging requirements and no more than 4 batteries in parallel.

    With low to medium current draw installations (the vast majority of applications) you may never see an issue and your storage capacity will be greatly increased - I.E. 2 x 200 Amp = 400 Amp capacity. When installing, fully charge the batteries separately - then let sit for 30 minutes before connecting together. When connecting in parallel - take the positive from Battery 1, and the negative from Battery 2 to your system as per the diagram below.

    The Smart Phone App will only show the information from one battery at a time - not both. This is another advantage of a separate Battery Monitor - it will show the total system environment.

    *Note: Slight variance of State of Charge or Amps may occur between the batteries in parallel however these should not vary by more than 5%. It is recommend that annually the batteries be disconnected and individually charged allowing them to sit at a fully charged state for 12hrs each before connecting back together.

  • Can I install the B-TEC battery on its side or end?

    No. Please note that the 12V 200Ah SLIM B-TEC Battery features a wider range of acceptable mounting orientations - please refer to the diagram below for guidance.

  • Q: What size terminals do I need to screw on the Enerdrive 300ah Lithium Battery?

    The Enerdrive 300ah lithium battery requires 8mm post terminals. The terminals are bolted onto the battery terminal bolt using spring washers.

Warranty

For details relating to this product's warranty CLICK HERE

Delivery

    For details relating to our delivery process CLICK HERE

Best Sellers From This Category:

Enerdrive B-TEC 200Ah Lithium Battery Only

Enerdrive B-TEC 200Ah Lithium Battery Only

40 Reviews

$2,086 RRP: $2,825 Save: $739

Enerdrive B-TEC 125Ah Lithium Battery

Enerdrive B-TEC 125Ah Lithium Battery

6 Reviews

$1,535 RRP: $2,023 Save: $488

Enerdrive B-TEC 300Ah Lithium Battery

Enerdrive B-TEC 300Ah Lithium Battery

2 Reviews

$3,179 RRP: $4,221 Save: $1,042

Enerdrive B-TEC 100Ah Slim Lithium Battery

Enerdrive B-TEC 100Ah Slim Lithium Battery

1 Review

$1,287 RRP: $1,612 Save: $325